HT800 Fire Blanket MSDS: Safety Guide & Technical Specifications

The HT800 Fire Blanket MSDS provides critical safety information about this essential fire suppression tool. You'll learn its composition, proper usage, and safety precautions to handle emergencies effectively.

What Is the HT800 Fire Blanket?

The HT800 is a high-performance fire blanket designed for extinguishing small fires or wrapping around persons during fire emergencies. According to its MSDS (Material Safety Data Sheet), it's made from fiberglass fabric with a fire-resistant coating, capable of withstanding temperatures up to 800°C (1472°F).

Key Features from HT800 Fire Blanket MSDS

• Material Composition:Fiberglass fabric with silicone coating
• Temperature Resistance:Up to 800°C continuous exposure
• Dimensions:Standard 1m x 1m or 1.2m x 1.2m sizes available
• Weight:Approximately 0.5kg for easy handling
• Storage Life:5-7 years when properly stored

How to Use the HT800 Fire Blanket Safely

The HT800 Fire Blanket MSDS emphasizes these usage steps:

1. Pull the blanket quickly from its container
2. Hold the blanket by the corners with your hands protected
3. Place the blanket gently over the fire to smother it
4. Leave in place until the fire is completely out and cooled
5. For personal protection, wrap the blanket around your body

Safety Precautions from HT800 MSDS

While the HT800 is safe when used properly, the MSDS notes these precautions:

• Never use on large or spreading fires
• Avoid contact with eyes - fiberglass particles may cause irritation
• Wash hands after handling the blanket
• Store in a dry, accessible location away from direct sunlight
• Inspect regularly for damage or deterioration

First Aid Measures

The HT800 Fire Blanket MSDS includes these first aid guidelines:

• Eye Contact:Flush with water for 15 minutes, seek medical attention
• Skin Contact:Wash with soap and water if irritation occurs
• Inhalation:Move to fresh air if dust particles are inhaled
• Ingestion:Rinse mouth and drink water if fibers are swallowed

Proper Storage and Maintenance

To maintain your HT800 Fire Blanket's effectiveness:

• Store in its original container or a protective pouch
• Keep in a visible, easily accessible location
• Protect from moisture and extreme temperatures
• Replace if the blanket shows signs of damage or contamination

Environmental Considerations

The HT800 Fire Blanket MSDS indicates:

• Fiberglass material is non-toxic to the environment
• Dispose of used blankets as general waste unless contaminated
• Recycling options may be available in some areas

When to Replace Your HT800 Fire Blanket

Check these signs that your blanket needs replacement:

• Visible tears or holes in the fabric
• Stiffness or brittleness in the material
• Discoloration or signs of chemical degradation
• After actual use in a fire emergency

HT800 vs. Other Fire Blankets

The HT800 stands out because:

• Higher temperature rating than standard wool blankets
• Lighter weight than many industrial alternatives
• Includes clear MSDS documentation for safety compliance
• Meets international safety standards (check your local regulations)

Where to Find the Complete HT800 Fire Blanket MSDS

For the full technical specifications:

• Request from the manufacturer or supplier
• Check the product packaging or included documentation
• Some manufacturers provide online access to MSDS documents

Remember, the HT800 Fire Blanket MSDS contains vital safety information you should review before using the product. Always follow local fire safety regulations and receive proper training in fire blanket usage.